Search results

The purpose of this study is to introduce a new type of sensor which uses microwave metamaterials and direct-coupled split-ring resonators (DC-SRRs) to measure the dielectric properties of solid materials in real time. The sensor uses a transmission line with a bridge-type structure to measure the differential frequency, which can be used to calculate the dielectric constant of the material being tested. The study aims to establish an empirical relationship between the dielectric properties of the material and the frequency measurements obtained from the sensor.

In the proposed design, the opposite arm of the bridge transmission line is loaded by DC-SRRs, and the distance between DC-SRRs is optimized to minimize the mutual coupling between them. The DC-SRRs are loaded with the material under test (MUT) to perform differential permittivity sensing. When identical MUT is placed on both resonators, a single transmission zero (notch) is obtained, but non-identical MUTs exhibit two split notches. For the design of differential sensors and comparators based on symmetry disruption, frequency splitting is highly useful.

The proposed structure is demonstrated using electromagnetic simulation, and a prototype of the proposed sensor is fabricated and experimentally validated to prove the differential sensing principle. Here, the sensor is analyzed for sensitivity by using different MUTs with relative permittivity ranges from 1.006 to 10 and with a fixed dimension of 9 mm × 10 mm ×1.2 mm. It shows a very good average frequency deviation per unit change in permittivity of the MUTs, which is around 743 MHz, and it also exhibits a very high average relative sensitivity and quality factor of around 11.5% and 323, respectively.

The proposed sensor can be used for differential characterization of permittivity and also as a comparator to test the purity of solid dielectric samples. This sensor most importantly strengthens robustness to environmental conditions that cause cross-sensitivity or miscalibration. The accuracy of the measurement is enhanced as compared to conventional single- and double-notch metamaterial-based sensors.

This paper aims to concentrate on research that has been conducted in the previous decade on metamaterial (MTM)-based sensors for material characterization, which includes solid dielectrics, micro fluids and biomolecules.

There has been a vast advancement in sensors based on MTM since the past few decades. MTM elements provide a sensitive response to materials while having a tiny footprint, making them an appealing alternative for realizing diverse sensing devices.

Related research papers on MTM sensors published in reputable journals were reviewed in this report, with a specific emphasis on the structure, size and nature of the materials characterized. Because electromagnetic wave interaction excites MTM structures, sensing applications around the electromagnetic spectrum are possible.

The paper contains valuable information on MTM sensor technology for material characterization, and this study also highlights the challenges and approaches that will guide future development.

This study aims to present dual band reconfigurable MIMO antenna for 5G (sub-6 GHz) and WLAN applications.

To achieve optimum bandwidth, radiation pattern and radiation efficiency, the defected ground structure (DGS) and a rectangular stub connected with the DGS are used. To further cover the sub-6 GHz spectrum (3.4–3.6 GHz) for future 5G communications, a two-element multi-input multi-output (MIMO) antenna configuration is designed by using the single element antenna. The proposed reconfigurable MIMO antenna using a PIN diode is designed on an FR4 substrate with a dielectric constant of 4.4 and a loss tangent of 0.02 and a 35 × 20 × 1.6 mm³ dimension.

The proposed antenna achieved dual operating bands of 3.4–4.1 GHz (5 G sub-6GHz applications) and 4.99–5.16 GHz (WLAN application) in the D = ON state. For D = OFF state, the proposed antenna achieved 3.55–3.65 GHz and 3.66–4.05 GHz frequency bands for 5G (sub-6GHz) applications. In terms of the envelop correlation coefficient, diversity gain, mean effective gain, total active reflection coefficient and isolation between the ports, the proposed antenna’s diversity performance characteristics are investigated and the obtained values are 0.05, 9.9 dB, ±3dB, −4dB, −15dB, respectively.

The fabricated prototype antenna on FR4 substrate has measurable parameters that are in good agreement with the simulated findings. Due to hardware design limitations, there is a minor difference between software and hardware results.

The proposed MIMO antenna is compact and reconfigurable for 5G (sub-6GHz) and WLAN applications, and from the graph, the measurements and simulations have been found to be in close agreement.

The purpose of this paper is to retrieve the dielectric constant of the material under test (MUT) by using an empirical relationship, which relates the dielectric properties with all three resonant frequencies of the proposed sensor. Each notch of the sensor is analyzed for sensitivity by using 15 different MUTs with relative permittivity ranging from 1.006 to 16.5 with a fixed dimension of 12 mm × 12 mm × 1.2 mm.

In this paper, we present a triple-notch metamaterial-based sensor for the solid dielectric characterization based on a microstrip transmission line and a direct coupled-double split ring resonator (DC-DSRR). The proposed sensor is designed, and its response is measured using a vector network analyzer to verify the concept. The shift in the resonant frequencies of the proposed sensor owing to contact with MUT is depicted as a function of permittivity using the curve fitting tool.

The proposed sensors have three notches, with the third notch being more sensitive than the first and second notch because of the high resonance frequency. For the first, second and third resonances, the proposed sensor has sensitivity ranges from 4.9% to 14.68%, 8.97% to 23.95% and 15.48% to 29.36%, respectively. The findings of the simulations, measurements and formulations are all in good accord.

In comparison to previous solid dielectric metamaterial sensors, the proposed triple-notch sensor based on a microstrip transmission line and DC-DSRR has the following advantages: it has a simple unit-cell structure and meets the needs of miniaturization, compact size, low cost and improved sensitivity. It determines the relative permittivity using all three notches so that the accuracy of the measurement is enhanced as compared with single- and double-notch sensors.

Marketing and Strategy.

BA level.

The case deals with IKEA’s unique service experience, and the company’s plans to expand into India. The question that is dealt with primarily is, “Can IKEA successfully introduce and adapt its service experience to the Indian market”. IKEA’s service experience is critically explored, as well as the concept of “service” in India.

After studying the case, it is expected that students will have a better understanding of what is a “service experience”, as well as how it can give a company a competitive advantage. It is also expected that students will have a better understanding of the retail market and consumer behavior in India.

Teaching notes are available for educators only. Please contact your library to gain login details or email support@emeraldinsight.com to request teaching notes.

CSS 8: Marketing.

The purpose of the paper is to provide an overview of the collaborative tagging phenomenon and explore some of the reasons for its emergence.

The paper reviews the related literature and discusses some of the problems associated with, and the potential of, collaborative tagging approaches for knowledge organisation and general resource discovery. A definition of controlled vocabularies is proposed and used to assess the efficacy of collaborative tagging. An exposition of the collaborative tagging model is provided and a review of the major contributions to the tagging literature is presented.

There are numerous difficulties with collaborative tagging systems (e.g. low precision, lack of collocation, etc.) that originate from the absence of properties that characterise controlled vocabularies. However, such systems can not be dismissed. Librarians and information professionals have lessons to learn from the interactive and social aspects exemplified by collaborative tagging systems, as well as their success in engaging users with information management. The future co‐existence of controlled vocabularies and collaborative tagging is predicted, with each appropriate for use within distinct information contexts: formal and informal.

Librarians and information professional researchers should be playing a leading role in research aimed at assessing the efficacy of collaborative tagging in relation to information storage, organisation, and retrieval, and to influence the future development of collaborative tagging systems.

The paper indicates clear areas where digital libraries and repositories could innovate in order to better engage users with information.

At time of writing there were no literature reviews summarising the main contributions to the collaborative tagging research or debate.

Social media channels provide an avenue for expressing views about different services/products. However, unlike merchandise/company websites (where users can post both reviews and ratings), it is not possible to understand user's ratings for a particular service-related comment on social media unless explicitly mentioned. Predicting ratings can be beneficial for service providers and prospective customers. Additionally, predicting ratings from a user-generated content can help in developing vast data sets for recommender systems utilizing recent data. The aim of this study is to predict ratings more accurately and enhance the performance of sentiment-based predictors by combining it with the emotional content of textual data.

This study had utilized a combination of sentiment and emotion scores to predict the ratings of Twitter posts (3,509 tweets) in three different contexts, namely, online food delivery (OFD) services, online travel agencies (OTAs) and online learning (e-learning). A total of 29,551 reviews were utilized for training and testing purposes.

Results of this study indicate accuracies of 58.34%, 57.84% and 100% in cases of e-learning, OTA and OFD services, respectively. The combination of sentiment and emotion scores showed an increase in accuracies of 19.41%, 27.83% and 40.20% in cases of e-learning, OFD and OTA services, respectively.

Understanding the ratings of social media comments can help both service providers as well as prospective customers who do not spend much time reading posts but want to understand the perspectives of others about a particular service/product. Additionally, predicting ratings of social media comments will help to build databases for recommender systems in different contexts.

The uniqueness of this study is in utilizing a combination of sentiment and emotion scores to predict the ratings of tweets related to different online services, namely, e-learning OFD and OTAs.

Purpose: This chapter investigates the current skill gap in small-scale industries, the need for skill development and digital training in micro, small, and medium enterprises (MSME), and reviews policies for skill development and solutions.

Need for the Study: While the legislature and organisations have initiated various considerations for the successful implementation of the Skill Development System in the country’s MSMEs, there are significant challenges that must be addressed quickly to fill the skill gap in workers in this digital era.

Research Methodology: Secondary data has been used for the chapter review. Analysis has been done based on review data from women handloom and handicraft workers in the micro or craft industry who received a Star rating from the National Skill Development Corporation (NSDC) partners in Lucknow. For data collection, a questionnaire based on random sampling was used. The data were analysed using a rudimentary weighted average and a percentage technique.

Findings: The studies provide answers to some fundamental problems: are small industry employees indeed mobilised to be skilled outside the official schooling system? Is the training delivery mechanism adequate to prepare pupils for employment? Would industries be willing to reduce minimum qualification criteria to foster skill development?

Practical Implication: Non-technical aptitudes digital and soft skills for workers in this sector should be emphasised in MSMEs, and significant reforms in MSME sectors and capacity-building education and training programmes should be implemented in the Indian industry to generate small and medium enterprises production and employment.

Purpose: The study aims to extract insights into five significant industries, pharmaceutical, space, defence, renewal energy, and information technology (IT), which have huge potential to make India achieving a five trillion-dollar economy in the future.

Design/methodology/approach: The authors focus on future-driven industries which are not only making India a third highest gross domestic product (GDP) producer country but also reviewing the different aspects of these industries and how they can assist India in achieving a five trillion-dollar economies along with determining India’s self-reliance through different governments initiatives in this direction.

Findings: The findings highlight the importance of inclusiveness of policymakers, stakeholders, private players, foreign investors, and the masses. Their significant contributions especially in the pharmaceutical, space, defence, renewal energy, and IT sectors in terms of creativities, innovations, intellect, executions, implementations, and improvements can assist India in achieving its five trillion-dollars economy soon.

Practical implications: This study offers (1) convincing insights into five key industries, pharmaceutical, space, defence, renewal energy, and IT, which have huge potential to increase total GDP volume shortly and (2) the investment areas for the masses where they can see their world not only self-reliant but also will see huge growth in their invested amount in these industries in future.

Originality/value: The insights of five key industries, pharmaceutical, space, defence, renewal energy, and IT, highlight that India has the potential to achieve a five trillion-dollar economy in the future; however, it does not ignore the significant contribution of other industries in making of total GDP.